|
Standard for Fire Doors and Fire Windows 防火门窗标准目录
NFPA 80 Standard for Fire Doors and Fire Windows 1999 Edition
Chapter 1 General
Chapter 2 Swinging Doors with Builders Hardware
Chapter 3 Swinging Doors with Fire Door Hardware
Chapter 4 Horizontally Sliding Doors
Chapter 5 Vertically Sliding Fire Doors
Chapter 6 Rolling Steel Doors
Chapter 7 Special Purpose Horizontally Sliding Accordion or Folding Doors
Chapter 8 Hoistway Doors for Elevators and Dumbwaiters
Chapter 9 Chute Doors
Chapter 10 Fire Shutters
Chapter 11 Access Doors
Chapter 12 Service Counter Doors
Chapter 13 Fire Windows
Chapter 14 Glass Block
Chapter 15 Care and Maintenance
Chapter 16 Referenced Publications
Appendix A Explanatory Material
Appendix B Drawings of Fire Door Assemblies and Components
Appendix C Fire Doors: Protection of Conveyor Openings
Appendix D Illustration of Types of Fire Window Components
Appendix E Fire Door and Fire Window Classifications
Appendix F Surface Attachments to Swinging Door Faces
Appendix G Door Hardware Locations
Appendix H Types of Door Construction
Appendix I Special Purpose Doors
Appendix J Radiant Heat Transfer
Appendix K Referenced Publications
Formal Interpretation
Index
Document Scope: 1-1.1* This standard regulates the installation and maintenance of assemblies and devices used to protect openings in walls, floors, and ceilings against the spread of fire and smoke within, into, or out of buildings. The fire performance evaluation of these assemblies is tested in accordance with NFPA 251, Standard Methods of Tests of Fire Endurance of Building Construction and Materials, for horizontal access doors; NFPA 252, Standard Methods of Fire Tests of Door Assemblies, for fire doors and shutters; and NFPA 257, Standard on Fire Test for Window and Glass Block Assemblies, for fire windows and glass block. It is not the intent of this standard to establish the degree of protection required or to constitute the approval of any product. These are determined by the authority having jurisdiction. This standard is based on product and engineering practices recognized as acceptable at the date of issue. Therefore, the provisions of this standard are not intended to be applied retroactively to installations that were in compliance at the time of installation. 1-1.2 Incinerator doors, record room doors, and vault doors are not covered in this standard. For requirements on their installation, see NFPA 82, Standard on Incinerators and Waste and Linen Handling Systems and Equipment, and NFPA 232, Standard for the Protection of Records. 1-1.3 For requirements on the installation of hoistway doors for elevators and dumbwaiters, see the applicable sections of ASME/ANSI A17.1, Safety Code for Elevators and Escalators, or CAN 3-B44, Safety Code for Elevators. Requirements for horizontally sliding, vertically sliding, and swinging doors as used in this standard do not apply to hoistway doors for elevators and dumbwaiters. 1-1.4 This standard does not cover fire-resistant glazing materials and horizontally sliding accordion or folding assemblies fabricated for use as walls and tested as wall assemblies in accordance with NFPA 251, Standard Methods of Tests of Fire Endurance of Building Construction and Materials. Consult the authority having jurisdiction for the design and installation of such materials and assemblies.
Current Edition: 1999 Next Revision Cycle: Annual 2006
信息来源：Fire China
|
